Window Motor Replacement

Mobile electric window motor replacement at your home or office, for windows that will not move or move too slowly.

Book Your
Car Service

icon-whatsapp

Pricing

Pricing varies based on your vehicle

Get a Quote

Service Info

Typical Duration 1.5 hours

We test the switch, wiring and motor to establish which has failed, remove the door trim and vapour barrier, replace the window motor and the regulator where required, refit the barrier and trim correctly, then re-initialise the window and test full travel.

Skip the garage, our master mechanics come to you

At your home or office
Fair & transparent pricing
6-month, 6000km warranty

The Most Trusted Mobile Window Motor Replacement

An electric window motor drives the regulator that raises and lowers the glass, working against the friction of the window seals every time. When it fails you get a window that will not move, moves very slowly, or stops partway and needs coaxing. A window stuck down is a security problem as much as a comfort one. Michanic replaces window motors at your home or office, after establishing that the motor rather than the switch or regulator is at fault.

Why Choose Our Mobile Window Motor Replacement Services?

  1. Motor, Switch or Regulator:
    All three produce a window that will not move. Testing identifies which before a part is bought, which matters because they differ considerably in cost.
  2. Window Secured Safely:
    A window stuck down leaves the car open. We can secure the glass in the raised position while parts are sourced if needed.
  3. Door Trim Removed Properly:
    Accessing the motor means removing the door card, and doing that without breaking clips or tearing the vapour barrier takes care.
  4. At Your Home or Office:
    A car with a window stuck open should not be left on a street waiting for a workshop slot.

Why We are the Best Choice for Mobile Window Motor Replacement

  • Vapour Barrier Restored:
    The plastic sheet behind the door card keeps water out of the cabin. Refitting it properly is what prevents damp carpets later.
  • Regulator Assessed Together:
    A failing regulator makes a motor work harder and burn out. If the regulator is the cause, replacing the motor alone repeats the failure.
  • Window Re-initialised:
    Many cars need the window position relearned after the work so one touch operation and anti-pinch protection function correctly.
  • Tested Through Full Travel:
    The window is run up and down repeatedly and checked for speed, noise and correct sealing.

A window that will not close is a security and weather problem immediately, but the mechanical story matters too. Window motors rarely fail on their own: they usually burn out working against a regulator whose cable has frayed or whose guides have seized, or against seals that have dried out and gripped the glass. Replacing the motor alone in that situation gives you a working window for a few months. There is also a safety function at stake, because anti-pinch protection depends on the motor and control module working together as expected.

Frequently Asked Questions

  • Is it the window motor, the switch or the regulator?
    All three cause a window that will not move. A switch fault often affects only one control position, a motor fault is usually silent or hums without movement, and a regulator failure typically makes a grinding noise or lets the glass fall into the door.
  • Why is my window moving slowly?
    Usually dry or perished window seals gripping the glass, or a regulator whose guides have seized, both of which make the motor work far harder. A motor nearing the end of its life produces the same symptom, which is why the cause is tested rather than assumed.
  • Should the regulator be replaced with the motor?
    If the regulator caused the motor to fail, yes. On many vehicles they are supplied as a single assembly in any case, and where they are separate, fitting a new motor to a worn regulator usually means doing the job twice.
  • Can a window be secured if the motor fails while it is down?
    Yes. The glass can be raised manually and held in place while the correct part is sourced, which removes the security and weather problem immediately even if the repair takes another day.
  • Why does my window need re-initialising after repair?
    Cars with one touch operation and anti-pinch protection learn the window travel limits. After the motor or regulator is disturbed those limits must be relearned, or the window stops short or reverses unexpectedly.